@yasaraltaf
Yasar altaf replied to the topic Failed to create Virtual SAN Manager in Hyper-V cluster in IT Administration Forum 1 year, 11 months ago
Thanks for reply…
During troubleshoot i installed server 2019 fresh OS and create VM with Generation 1 and create the vSAN so my vm started fine…
Note: but in server 2012 even with Generation 1 it doesn’t boot.
So in 2019 server created new Guest OS and attached the vSAN to VM and its successfully started, so as i wanted to map the LUN to Guest OS so i created the New LUN in HPE MSA 2050
and copied the WWPN number of VM (Guest OS) and pasted in HPE msa and mapped the newly created volume..
but i dont see new mapped volume in Guest VM in disk mgmt.. even after restart…
Could you please advise how to fix it…
Thanks
Yasar altaf replied to the topic Failed to create Virtual SAN Manager in Hyper-V cluster in IT Administration Forum 1 year, 11 months ago
Also please do find san manger details, attached separately because unable to attached more then 4 in previous reply
Yasar altaf replied to the topic Failed to create Virtual SAN Manager in Hyper-V cluster in IT Administration Forum 1 year, 11 months ago
Dear Leo,
Thanks for your prompt reply, as we have 2 physical Host, and each have one HBA card with 2 ports. for reference please do find the attachment of configuration
Yasar altaf replied to the topic Failed to create Virtual SAN Manager in Hyper-V cluster in IT Administration Forum 1 year, 11 months ago
Appreciate for you response
I mean that i able map the CSV volume to physical host
but i failed to create the hyper-v San manger
when i create san manager with available wwwn number and after once i attached that virtual san manager to my VM so vm not booting..
when i remove virtual san manager from vm so vm gets start fine
i am not booting vm from storage any kind of…
Yasar altaf started the topic Failed to create Virtual SAN Manager in Hyper-V cluster in IT Administration Forum 1 year, 11 months ago
Hi,
I am facing issue with RDM mapping.
Basically, my client has 2 host clusters and an HPE SAN 2050 which is connected directly to the host over FC connection.
So I have mapped CSV but when I create Virtual San Manger and map that Virtual SAN switch to my VM, the VM doesn’t boot with the error below.HPE confirms that the SAN storage can connect directly to the host. It supports NPIV and the HBA card driver is also updated.
My current host OS is Windows Server 2012 R2 and VM is also same…Error:. NPIV virtual port operation on virtual port. Failed with error. The operation is not supported by the fabric..
please advise
Yasar altaf became a registered member 3 years, 10 months ago
