In this article, I will show you how to restart services on remote computers using PowerShell. I will also provide a sample PowerShell script that you can adjust for your purpose.

Restarting a service is quite a common system administration task. If a service has to be restarted on a local computer, we use Service Manager MMC (services.msc). We use the same MMC when a service restart is required on a remote computer. If you want to restart the same service on multiple computers, however, there is no built-in tool. The PowerShell code that I am going to talk about will help you here.

PowerShell is an easy way to restart a service on a remote computer. Though there are multiple ways to restart a service using PowerShell, I prefer the Restart-Service cmdlet. The script I am going to talk about is a wrapper around this cmdlet to get the functionality we need.

This script takes three arguments:

  • ComputerName: Here you can provide the list of computers on which to restart the service. This is an optional parameter. If you don’t use it, the script runs against the local computer.
  • ServiceName: Name of the service that you want to restart on remote computers. This is a mandatory property.
  • OutputDir: Name of the directory where you want to store the output files failedcomputers.txt and successcomputers.txt, which contain the status of the service restart.

You probably know that the Get-Service cmdlet can be used to query remote services. Only a few know that the Start-Service, Stop-Service, and Restart-Service cmdlets can be used to perform respective operations on remote computers even though they don’t have a –ComputerName parameter. The procedure is very simple. Instead of the –ComputerName parameter, we need to use the –InputObject parameter for these cmdlets to stop/start/restart services. The value for –InputObject can be derived using Get-Service. See the code below for more clarity.

$ServiceObj = Get-Service -Name $ServiceName -ComputerName $Computer
-ErrorAction Stop
Restart-Service -InputObj $ServiceObj -erroraction stop

The Get-Service cmdlet with –ComputerName will return an Object reference to the service we are querying. We can input this object to Start-Service, Stop-Service, or Restart-Service to perform the respective actions. The additional –ComputerName parameter is not needed, as I show in the above code. This is the core part of the script. Everything else is a wrapper on top of it.

I also used the Test-Connection cmdlet in the script to see if a computer is reachable before querying for services. I build a custom PsObject to store the output results, which will be displayed on the screen and filtered at the end of the script to save the details in failedComputers.txt and successComputers.txt. By default, these output files are created under c:\. If you want to change the location, use the –OutputDir parameter while running the script.

Samples to restart a service with the PowerShell script ^

Restart a service on a local computer:

.\Restart-Service –ServiceName dnscache

Restart a service on a remote computer:

.\Restart-Service -ComputerName Comp1 –ServiceName dnscache

Restart a service on Comp1 and Comp2:

.\Restart-Service –ComputerName Comp1, Comp2 -ServiceName dnscache

Take servers list from a text file and restart a service on them:

Get-Content c:\scripts\servers.txt | .\Restart-Service –ServiceName dnscache

This is the output of the command above:

PowerShell - Restart a remote service

PowerShell - Restart a remote service

For safety, try the script in a lab environment before you run it in production. Hope this script helps. The script is provided as is without warranty of any kind!

  1. Mark Bradley 9 years ago

    Hello Sitaram, I am very interested in this subject as I have always used command line and the "SC" command to accomplish similar.
    You mention the creation ow wrappers and output files and I do not see that in your script. I follow the idea of what you are doing but I am missing the syntax. Can you provide a full script exampel rather than the bits and pieces.


  2. Author 9 years ago

    Hi Mark, thanks for your comment. You can download complete script using the download link given at the bottom of the article. That has the code for saving the results into text files.

    For example, keep all your servers in a single text file named servers.txt and pass it to script like below.

    .\restart-service -ComputerName (Get-Content c:\servers.txt) -ServiceName dnscache

  3. Ben 8 years ago


    Great post, I have a follow-up question:

    I'd like to re-start a variety of services across a handful of different machines as part of a routine maintenance package. The services are not named the same on any of the machines.

    I'd like to pipe in a text file that lists each machine and the service(s) on those machines to re-start. How would I architect that?



  4. Ben 8 years ago

    Hello Sitaram, Thank you for your post. Do you know of a method to pass credentials using this in conjunction with the get-credential commandlet?

  5. Author
    Sitaram 8 years ago

    @Ben : Assuming you have text file formatted in below way...


    you can try below code restart the services across computers.

    $data = get-content c:\comps-services.txt
    foreach($line in $data) {

    $computer = $line.split(":")[0]
    $ServiceName = $line.split(":")[1]
    $sObj = Get-Service -COmputerName $Computer -Name $ServiceName
    Restart-Service -InputObj $sObj

    This is a very basic version of script. Try if it serves your needs.

  6. Author
    Sitaram 8 years ago

    If you want to pass the credentials to the script itself, then you need to make two changes to the script.

    1) Add a new parameter called "Credentials" and make it to prompt/accept credentials object.

    [PSCredential]$Credential = Get-Credential

    2) You need to add "-Credential $Credential" for Get-Service and Restart-Service cmdlets in the code.

    Hope it helps....

  7. ps 8 years ago

    Giving Error
    PS C:\tmp> Get-Content c:\tmp\servers.txt | .\Restart-Service.ps1 -ServiceName gpssvc
    Unexpected token 'in' in expression or statement.
    At C:\tmp\Restart-Service.ps1:4 char:185
    + begin { } process{ $SuccessComputers = Join-Path $OutputDir "SuccessComputers.txt" $FailedComputers = join-path $Outp
    utDir "FailedComputers.txt" $OutputArray = @() foreach($Computer in <<< S

  8. Rachel 8 years ago

    I am getting a success output of IsOnline = True, however the service is not restarting.
    Do I need to input the service name anywhere in the script itself?

  9. Nino Iaccarino 8 years ago

    Exactly what I was after. Thank you very much!

  10. Aaron Menezes 7 years ago

    Hey Sitaram. Thanx for your post. I need to restart multiple services(same services) on multiple computer and need to output the data to a text file. is it possible

  11. John Vandy 7 years ago

    Aaron, I modified the script under param to change the ServiceName string from
    To [parameter(ValueFromPipeline=$true,ValueFromPipelineByPropertyName=$true)]
    [string[]]$ServiceName = $env:servicename,

    Have a txt file with a list of the services you want to restart in the same folder as the script and server txt file and run by
    .\Restart-Servcie.ps1 (Get-Content .\Servers.txt) -ServiceName (Get-Content .\Services.txt) -OutputDir .\
    This work for our purpose, I just need to format the output now to include the list of services.

  12. bob 7 years ago

    Can someone kindly share the corrected script for restarting remote services using the passing credentials parameter with output.txt sucess.


  13. bob 7 years ago

    Is this correct?

    $data = get-content c:\filename.txt
    foreach($line in $data) {
    $computer = $line.split(“:”)[0]
    $ServiceName = $line.split(“:”)[1]
    $Credential = Get-PSCredential domain\username
    $sObj = Get-Service -COmputerName $Computer -Name $ServiceName
    Restart-Service -InputObj $sObj
    $SuccessComputers = Join-Path $OutputDir “SuccessComputers.txt”
    $FailedComputers = join-path $OutputDir “FailedComputers.txt” $OutputArray = @() foreach($Computer in <<< S

  14. akki 6 years ago

    Can any one help with starting multiple services on multiple remote servers?

  15. Pankaj Kumar 2 years ago

    Hello Sitaram,

    My requirement is below.

    We have 6 windows applications servers and 12 application services (All are same services) are running on all servers.

    Now application team wants to restart the all services on one server and then after 10 mintus gap it will go for second server and so on...

    And post completion of service restart email need to be send to application team email id.


    This is urgent request pls help me to get it done... we have large infra approx more then 1000 servers with all kind of support

Leave a reply to Ben Click here to cancel the reply

Please enclose code in pre tags

Your email address will not be published. Required fields are marked *


© 4sysops 2006 - 2021


Please ask IT administration questions in the forums. Any other messages are welcome.


Log in with your credentials


Forgot your details?

Create Account