- Managing shared mailboxes in Office 365 with PowerShell - Thu, May 5 2016
- Managing shared mailboxes in Office 365 with the GUI - Wed, May 4 2016
- Installing and configuring the Enhanced Mitigation Experience Toolkit (EMET) - Wed, Mar 16 2016
Recently, I needed to convert a physical Windows Server 2012 R2 server to a virtual machine (VM). When the server was deployed, it was configured with UEFI. I downloaded the Microsoft Virtual Machine Converter and ran through the process to start the conversion of the machine after hours. When I got to the very end of the wizard, I received this error: “Microsoft Virtual Machine Converter encountered an error while attempting to convert the virtual machine. Details: There are blocking issues for the physical-to-virtual conversion: There is no BCD boot device found in the source machine, noticing that the conversion of an EFI boot machine is currently not supported.”
Microsoft Virtual Machine Converter encountered an error while attempting to convert the virtual machine.
Unfortunately, the Virtual Machine Converter doesn’t support P2V conversions for UEFI computers with GPT disks such as this server. Backing up all the data and performing a full server migration is an option. However, this particular server just had the application on it upgraded. In addition, a full migration would have been very time consuming, especially considering that the specialty application required hours of vendor assistance to install.
Convert the disk to VHDX
The first thing that we need to do is convert the physical disk to VHDX. A great Sysinternals tool from Microsoft called Disk2vhd will perform this task. Download Disk2vhd and extract the executable on the server that needs to be converted. Run the application, set the location where you want the VHDX file stored, and click Create.
Convert the disk to VHDX using Disk2vhd.
For the VHD file name, I used a UNC path to a temporary storage location that had enough storage to store all the data from the server. After the process completes, transfer the VHDX file to a Windows 8+ workstation.
Convert the disk from GPT to MBR ^
Next, we’ll need to convert the disk from a GPT disk to an MBR disk. A few different ways exist to do this (including the built-in tools in Windows), but I’ve found that using AOMEI Partition Assistant is, by far, the most reliable way to perform the conversion. In most cases, the Standard edition (that is free) can do everything you’ll need as long as you run it from Windows 8+ and not a server. If you’re working with very large partitions, you may need to pay for the Professional edition.
Using a Windows 8+ computer, mount the VHDX file by right-clicking it and choosing Mount.
Mount the VHDX file in File Explorer.
Make note of the drive letter that is assigned to the disk after it is mounted. In my case, it was H:\.
View the mounted VHDX file as a drive letter in File Explorer.
Next, open AOMEI Partition Assistant and find your disk. Right-click the disk where it shows Disk Number (GPT) and then choose Convert to MBR Disk.
Convert GPT disk to MBR in Partition Assistant.
Accept the warning messages and then click Apply in the upper-left corner to apply the changes. Next, right-click each of the extra partitions at the beginning of the disk and choose Delete Partition.
Remove extra partitions in Partition Assistant.
Choose the default option, Delete partition quickly, and then click OK for each. Click the Apply button one last time to apply the change. After the process completes, close Partition Assistant.
Last, you’ll need to disconnect from the VHDX file. Go to File Explorer, right-click the mounted VHDX file, and choose Eject.
Eject the VHDX file in File Explorer.
Create the new virtual machine ^
In Hyper-V Manager, run through the normal steps to create a new VM. When creating the VM, make sure that you choose a Generation 1 VM and, instead of creating a new VHDX file, attach the file that was generated by Disk2vhd that we’ve edited.
Assuming you’ve done everything correctly so far, you should be greeted by a black screen with a blinking cursor if you attempt to start the VM that never boots into Windows.
Disk2vhd converted Server 2012 R2 with blinking cursor that won't boot
Repair the virtual machine ^
To repair the VHDX so it will boot into Windows Server 2012 R2, we’ll need a Windows Server 2012 R2 install ISO image. Attach the ISO to the VM and boot from the ISO/virtual DVD drive. On the first Windows Setup screen, click Next, and then click the Repair your computer link.
Windows Server 2012 R2 Setup Repair your computer
Click the Troubleshoot option and then click Command Prompt.
Command Prompt in Advanced Options of Troubleshooting
Next, we’ll use diskpart to make the partition on the VHDX active. At the command prompt, run the following commands:
diskpart list disk select disk 0 list partition select partition 1 active exit
Use diskpart to make the partition active.
Depending on your configuration, you may need to adjust the disk and partition numbers. After setting the partition as active, reboot the VM and boot to the Windows Server 2012 R2 setup ISO again. Run through the same process we used in the last step to get to the command prompt again.
Next, we’ll use bootrec to make the VHDX bootable. At the command prompt, run the following commands:
bootrec /fixmbr bootrec /fixboot bootrec /rebuildbcd
Use bootrec to make the VHDX bootable.
After the final command completes, you’ll be asked if you want to add the installation to the boot list. Type “y” and press Enter. Detach the Windows Server 2012 R2 ISO and reboot the system.
Boot Windows Server and clean up ^
After rebooting, you should be greeted by a familiar-looking boot screen while Windows adjusts to its new virtual hardware.
Windows Server 2012 R2 gets devices ready after Disk2vhd and repair.
The last thing we’ll need to do is some cleanup of things the physical server needed that the virtual server won’t need. Open Device Manager and click View, then Show hidden devices.
Show hidden devices in Device Manager.
When you expand the different hardware sections in Device Manager, you should now see phantom hardware that has a lighter icon than the existing hardware.
Phantom physical hardware in Device Manage for P2V system
For each of the phantom pieces of hardware, you’ll need to right-click and choose Uninstall to remove it.
Next, you’ll need to go to Program and Features in the Control Panel and remove any vendor-specific software such as NIC teaming tools or hardware management software. Once you’ve done that, reboot the server, re-attach the network adapter to the network, and you’re ready to use your new VM.