- Configuring Defender Antivirus: Exclusions, real-time protection, scans, and remediations - Mon, Sep 26 2022
- Get updates for Windows Server 2022 in WSUS - Mon, Sep 19 2022
- Microsoft Defender: Control updates for malware signatures using Group Policy or PowerShell - Thu, Sep 15 2022
Older office computers usually do not suffer from a lack of CPU or graphic performance, but rather the access to slow disk drives makes starting Windows and applications a test of patience. Switching to low-cost consumer SSDs significantly improves the situation even on PCs with SATA II.
Tools from Samsung und SanDisk ^
Samsung and SanDisk are among the largest manufacturers of SSDs. Both offer free tools to clone existing discs. These are OEM versions of known products only usable with the drives of the respective manufacturers.
Samsung Data Migration ^
You can install the Samsung tool on any computer even if it does not contain a drive from the manufacturer. But after the installation, it will insist on the selection of a target disk from Samsung and will not accept other SSDs.
The actual cloning process is relatively simple in most cases. As a first step, you select the target drive; the software automatically picks the source disk. This is always the one on which Windows is installed.
Cloning of pure data drives is therefore not possible. In the next dialog, you just have to confirm the process, and the copying starts.
The situation becomes more complicated if the amount of data on the source medium is larger than the space on the target SSD. Then the tool automatically switches to the custom mode, which lets you select files you don't want to transfer.
As a filter, you can either specify the minimum file size or select certain file extensions. However, it limits you to the given extensions, so you can't exclude typical memory guzzlers like virtual hard disks (VHDs). Omitting a whole folder will also not be possible.
If you've achieved the necessary reduction of the data volume, the next step will be to decide on the target drive. After this, you'll get a summary of options selected, and then you start the cloning process.
Acronis True Image WD Edition ^
SanDisk provides a version of Acronis True Image 2016 for cloning disks on SSDs. It is limited to the manufacturer's hardware, but in addition to the cloning, it provides functions for partitioning and creating an emergency disc.
After installing the software, click on the tools symbol and select Clone Disk from the dialog below.
Finally, you can activate either the automatic or the manual cloning mode.
If you choose the latter option, you will later have to determine in an additional dialog how to adjust the volumes on the target medium.
Now you define the source and target drive in two consecutive dialogs.
If you've selected the manual clone mode, you will now have to decide on a method for moving. You can choose Proportional if you want to adjust the partitions to the size of the SSD; however, you can also take it as 1: 1 (As is) or manually adjust the settings.
If you chose the automatic method, True Image selects the Proportional option without confirmation and skips this dialog.
Subscribe to 4sysops newsletter!
The summary of the selected source and target disks appears after you have done this step, and after confirmation, the computer restarts. It will then boot to the Acronis recovery environment and begin cloning the HDD.